•2 fixed switching outputs for 75 % and 100 % contamination level
•4-20 mA output for pressure drop
•Signal suppression for outputs during the cold start phase and temporary pressure peaks
•IO-Link version with 1 x programmable switching output
• Connecting flange compatible with third-party products, G1/2 Hydac, G1/2 Stauff, M20x1.5 Filtration Group, M20x1.5 Bosch Rexroth or G1/2 MP-Filtri
Oil moisture sensor BCM-W
This sensor can be used to measure the relative moisture in oil, before the saturation point of the oil is reached and free water is formed. It is available as a pure transmitter as well as with a local display. Operating pressure up to 50 bars / 725 psi.
Particle Monitor BPM
The BPM-100 particle monitor was designed specifically for monitoring particles in oil. Continuously monitoring the fluid for solid particles can extend oil change intervals, thus significantly reduce maintenance costs. This makes the BPM-100 particle monitor an essential part of your condition monitoring system.
Metal Detector BMD
The BMD is a smart sensor and based on the inductive measuring system to properly sort the ferritic particles in the respective fluid. It can distinguish between fine and coarse ferromagnetic particles. It has analog and digital output signals.The BMD also features an automatic cleaning process.
Condition Monitor BCM-LS
The Bühler condition monitoring liquid level sensor (BCM-LS) was designed specifically to continuously monitor the relative humidity, temperature, permittivity, conductivity and liquid level in oil tanks. By continuously monitoring the fluid, sudden and subtle level changes, deterioration or changes in oil quality can be accurately detected and the oil change intervals
extended or planned accurately.
Condition Monitor BCM-MS
The Condition Monitoring Multi Sensor (BCM-MS) was designed specifically to continuously monitor the relative humidity, temperature, permittivity and conductivity in oil. By monitoring the fluid, sudden and subtle deterioration or changes in oil quality can be accurately detected and the oil change intervals extended or planned accurately. Maintenance costs can be reduced significantly. This makes the Bühler Condition Monitoring Multi Sensor an essential part of your condition monitoring system.